Wuxi Huizhou Fishery Machinery Co.

Professional designed machinery focusing on feed/biomass pelleting area with reassuring after-sales service.

Home > Knowledge > Content
Straw hay pellet machine production instructions
- Dec 18, 2018 -

From the structural design point of view, the design of the Straw hay pellet machine is reasonable and scientific, suitable for different feed granulation processing, with small floor space and low noise. Powdered feed and grass powder can be granulated without (or a little) liquid addition. This is therefore very advantageous for the later storage of the feed, which is convenient for long-term storage.

In comparison, the pellet feed product made by the straw hay granule machine has high surface hardness, high granulation efficiency, large yield, and good internal maturation of the feed, which can improve the nutrient digestion and absorption rate, and is suitable for feeding rabbits, fish, ducks and experimental animals can achieve higher economic benefits than mixed powdered feeds. The machine is equipped with different aperture molds to adapt to different materials granulation to achieve the best results.

For the processing requirements of different feed pellets, the straw hay pellet machine can guarantee a good pressing effect. Among them, the compression molding of wood chips and corn stalks requires a lot of pressure. In the same granulation equipment, the roller parts are the central components of the whole equipment, and high-quality alloy steel is used to improve the service life of the roller.