Wuxi Huizhou Fishery Machinery Co.

Professional designed machinery focusing on feed/biomass pelleting area with reassuring after-sales service.

Home > Knowledge > Content
Design principle and processing precision of feed mixer
- Sep 08, 2018 -

The feed mixer can effectively select the horizontal mixer according to the production volume every day during the operation, mainly because the processing time of each batch of the mixer is about 10 minutes, plus the time of discharging and feeding, the processing time of each batch of materials. It can be processed in 15 minutes, and 4 batches can be processed continuously in 1 hour. If you choose a mixer with a throughput of 100 kg per batch, you can process 400 kg per hour. Users can choose a horizontal mixer according to their needs.

The capacity of the feed mixer, which is mainly used to stir and mix the double spiral belt, to push the material in the opposite direction should be substantially the same. Since the pitch of the inner spiral belt should be smaller than that of the outer spiral belt, the pitch of the inner spiral belt should be smaller than that of the outer spiral belt, and the width should be larger than the outer spiral belt, otherwise the material will be concentrated in one direction. Therefore, pay attention to this when selecting a horizontal mixer.

The feed mixer is designed to a certain extent according to its design principle. The gap between the equipment and the casing can be 4 mm to 10 mm, and the material can be frictionally driven to participate in the mixing. However, since the pulverization particle size and the friction coefficient of the material are not the same, the time for the materials of the various components to participate in the mixing is different, resulting in product non-uniformity. Some manufacturers have realized this and have improved the product.

One is to pay attention to the processing precision, so that the bottom gap is reduced to about 3 mm; the other is to make the position between the main shaft and the housing adjustable, and the gap between the spiral belt and the housing can be frequently adjusted according to the amount of wear. . These two forms of product should be the best choice when choosing a mixer.

http://www.bio-pelletmill.com/