Wuxi Huizhou Fishery Machinery Co.

Professional designed machinery focusing on feed/biomass pelleting area with reassuring after-sales service.

Home > Knowledge > Content
Feed pellete making machine installation and use
- Apr 21, 2018 -

The installation of a Feed pellete making machine is, in fact, to place it on a stable and soft surface to eliminate vibrations and reduce noise. In addition, we also need to pay attention to this suspension lock on the four wheels of the machine. At this time, it will be convenient for the user to move and use it steadily. Then, for the motor, it can also be used to pause. Ring pause.

Feed pellete making machine usage:

About the grinding of the Feed pellete making machine, first of all, it is necessary to pay attention to take 3-10 pounds of powdered feed that has been mixed, and then it should be added to 10% of the edible oil and mix thoroughly, and pry open the oil block by hand. First add feed, start the machine and then use a wrench to adjust the pressure roller bolt until the normal discharge. After the oily feed was repeatedly squeezed in the machine for 3-5 times, the dry material was gradually added.

After the Feed pellete making machine is added with dry material, if it hears a mechanical slush, pay attention to slightly loosen the pressure roller bolt until the material is discharged normally. If the oiled material is not pressed out, or after the dry material is placed, the pelletizer will not discharge material. At this time, it is necessary to pay attention to the need to directly use the steel nail to see through the feed in the mold plate (steel nails). Flatten the head, then rerun it.

Feed pellete making machine in the adjustment of the length of the feed should be adjusted by adjusting the cutter located on the edge of the material outlet to adjust the length of the pellets. After that, it is necessary to pay attention to the storage of feed pellets. The processed pellets have a relatively high temperature and should be placed in a ventilated place. It can be stored in bags after being cooled to room temperature.

Finally, as mentioned above, it is not difficult to install and use the Feed pellete making machine. We must pay attention to some trivial matters to ensure the service life of the feed granulator equipment and the quality of the Feed pellete making machine processing.

http://www.bio-pelletmill.com/