Wuxi Huizhou Fishery Machinery Co.

Professional designed machinery focusing on feed/biomass pelleting area with reassuring after-sales service.

Home > Knowledge > Content
Feed mixer selection considerations
- May 09, 2018 -

In the process of work, the feed mixer is mainly a mechanical device that evenly mixes two or more materials under the action of mechanical force and gravity. During the mixing process, the contact surface area of the material can also be increased to promote chemical reactions, and the feed mixer can also accelerate physical changes. The market currently includes different types of mixer equipment.

 

Users can choose the right feed mixer according to the actual needs. At present, the equipment mainly includes gas and low-viscosity liquid mixers, medium and high-viscosity liquid and paste mixers, and powdered and granular solid materials. Then, in the selection process, what issues need attention? First, we need to calculate the daily production volume to ensure that the selected equipment can meet the daily production requirements.

 

Second, when selecting a type, special attention must be paid to the structural design of the feed mixer. For example, a horizontal spiral ribbon mixer is used to stir and mix the double spiral ribbons. The ability to push materials in the opposite direction should be basically the same. Since the pitch of the inner spiral band should be smaller than that of the outer spiral band, the pitch of the inner spiral band should be smaller than that of the outer spiral band, and the width should be greater than the outer spiral band, otherwise the material will be concentrated in one direction.

 

Third, it is also necessary to take into account the form of the feed mixer. This is because after the mixing machine finishes the mixing operation within the specified time, releasing the material at one time in the shortest time can ensure the uniformity of the material. If the gradual deployment of the side spiral strips will not only delay the time, but it may not reach the expected productivity. Also note the order of feeding.

 

In general, choosing a suitable feed mixer equipment and applying it properly according to the actual production requirements not only can significantly improve the quality of the mix, but also quickly reflect the benign effect in the production process. In addition, if the user masters the technology of self-mixing materials, it can also greatly reduce the cost of materials, thereby increasing profits.

http://www.bio-pelletmill.com/